Research on the Model Construction of Knowledge Engineering System for Marine Research Institutes

Sun Haibin; Zhang Xiaojing; Liu Xi

doi:10.13266/j.issn.2095-5472.2021.012

PDF(1255 KB)

Knowledge Management Forum ›› 2021, Vol. 6 ›› Issue (2) : 118-126. DOI: 10.13266/j.issn.2095-5472.2021.012

Research on the Model Construction of Knowledge Engineering System for Marine Research Institutes

Author information +

History +

Abstract

[Purpose/significance] The purpose of this paper is to provide the best engineering practice for the construction of knowledge management in ship research institutes.[Method/process] Firstly, this paper briefly analyzed the present situation and characteristics of the knowledge management in the ship research Institute, and then put forward the methods of solving the problem. By analyzing the process of research and the process of knowledge management, a general model of knowledge management system was designed, including the model of knowledge asset base, the model of knowledge management platform and the model of knowledge operation system. Finally, the validity and adaptability of the knowledge management model were verified by applying it to a ship scientific research institution. [Result/conclusion] By applying this model to a certain type of domain, the efficiency of knowledge production and use is improved effectively, and the research cost is reduced.

Key words

knowledge management / smart ship / scientific research / model building

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Sun Haibin , Zhang Xiaojing , Liu Xi. Research on the Model Construction of Knowledge Engineering System for Marine Research Institutes[J]. Knowledge Management Forum. 2021, 6(2): 118-126 https://doi.org/10.13266/j.issn.2095-5472.2021.012

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis

[1]	陈作,赵心,戴钰杰. 船舶系统研制知识工程信息化平台建设[J].科技导报,2020,38(21),75-82. Cited in this article [1]

[2]	田锋. 知识工程2.0[M].北京:机械工业出版社,2016:5-18. Cited in this article [1]

[3]	SAINTER P, OLDHAM K, LARKIN A. Product knowledge management within knowledge-based engineering systems[C]// Proceedings of DETC’00 ASME 2000 design engineering technical conference. New York: Baltimore,2000:1-8. Cited in this article [2]

[4]	SZYKMAN S, RAM D S, CHRISTOPHE B. Design repositories: next-generation engineering design databases[J]. IEEE intelligent systems, 2000, 15(3):48-55. Cited in this article [1]

[5]	孙朝阳，王刚，吕民, 等. 基于 PDM 的工艺知识库管理方法研究[J].计算机集成制造系统,2004(9): 1090-1094. Cited in this article [1]

[6]	安蓉,陈作. 基于系统工程的军工研发企业精益研发体系实践[C]//第二届中国系统科学大会.北京:上海系统科学研究院, 2018:11-12. Cited in this article [1]

[7]	郑田田.加强军工科研院所科技成果管理工作的研究[J].科技经济市场,2020(5):131-133.

[8]	MCKIBBON K A, LOKKER C, KEEPANASSERIL A, et al. WhatisKT wiki: a case study of a platform for knowledge translation terms and definitions.descriptive analysis[J]. Implementation science,2013,8(1):15-17. Cited in this article [1]

[9]	GEBERT H, GEIB M, KOLBE L, et al. Knowledge-enabled customer relationship management: integrating customer relationship management and knowledge management concepts [J]. Journal of knowledge management,2003 ,6(5):23-26. Cited in this article [1]

[10]	李格. 基于军工科研院所项目知识萃取的流程方法研究.项目管理技术[J].2019,10(1):92-96.

[11]	贾倩,王彦静,杨玉堃.基于本体的统一知识模型表达及应用[J].情报理论与实践,2017,40(9):125-128,89. Cited in this article [1]

[12]	LIAO S H. Knowledge management technologies and applications—literature review from 1995 to 2002[J]. Expert systems with applications, 2003,3(2):15-19. Cited in this article [1]

[13]	ZHUGE H. A knowledge flow model for peer-to-peer team knowledge sharing and management[J]. Expert systems with applications , 2002 (1):5-8. Cited in this article [1]

[14]	朱红,贾倩,杨玉堃,等.面向型号的关键知识萃取及表达方法研究[J].航天工业管理,2017(4):45-49. Cited in this article [1]

[15]	ZHUGE H. Knowledge flow management for distributed team software development[J].Knowledge-based systems,2002 ,7(8):13-17. Cited in this article [1]

[16]	GU X J, QI G N, YANG Z X, et al. Research of the optimization methods for mass customization（MC）[J].Journal of materials processing technology，2002 ,2(1):7-10. Cited in this article [1]

[17]	FUJITA K. Product variety optimization under modular architecture[J]. Computer-aided design, 2002 ,8(12):23-28.

[18]	孙桂才,李江,王镜瑞,等.当前科研院所军工管理工作的探索[J].船舶工程,2017,39(S1):282-285. Cited in this article [1]

[19]	SVENSSON C, BARFOD A. Limits and opportunities in mass customization for “build to order” SMEs[J] . Computers in industry, 2002 ,4(1):17-21. Cited in this article [1]

[20]	陆佳颖,方静.基于知识管理的工程船舶设计进度管理优化[J].船舶工程,2018,40(4):95-99. Cited in this article [1]

[21]	LI C L, ZHAO R Y. A rough set based knowledge discovery model and its application in virtual assembly. 2011, 6(5):2132-2139. Cited in this article [1]

[22]	管官,林焰,纪卓尚.基于知识的船体结构快速设计及优化[J].船舶力学,2017,21(4):472-483. Cited in this article [1]

[23]	张艺萌,张艳,平林娜. 航天复合材料知识管理系统应用实践[J].航天工业管理,2019,4(1):79-81. Cited in this article [1]

[24]

KISWANTO D, NURJANAH D, RISMALA R. Fairness aware regularization on a learning-to-rank recommender system for controlling popularity bias in e-commerce domain[C]//2018 International conference on information technology systems and innovation (ICITSI). Piscataway: Intelligent Transport Systems and Infrastructures,2018:56-58.

Cited in this article [1]