面向船舶科研院所知识工程体系模型构建研究

孙海斌; 张晓静; 刘习

doi:10.13266/j.issn.2095-5472.2021.012

PDF(1255 KB)

知识管理论坛 ›› 2021, Vol. 6 ›› Issue (2) : 118-126. DOI: 10.13266/j.issn.2095-5472.2021.012

知识管理实践专辑

面向船舶科研院所知识工程体系模型构建研究

作者信息 +

Research on the Model Construction of Knowledge Engineering System for Marine Research Institutes

Author information +

文章历史 +

摘要

[目的/意义] 旨在为船舶科研院所知识管理建设提供可落地的最佳工程实践。[方法/过程]首先简要分析船舶科研院所在知识管理工作中的现状及特点，以此提出解决问题的出发点和思路。通过分析船舶科研院所的科研生产过程及知识管理活动过程，设计适合船舶科研单位实际情况的知识管理系统总体模型，包括知识资产库模型、知识管理平台模型和知识运营体系模型。最后通过将知识管理模型应用到某船舶科研单位进行实践，验证该模型的有效性和适应性。[结果/结论]通过将该模型应用到某型号领域知识进行验证，有效提高了知识生产和使用效率，降低了研发成本。

Abstract

[Purpose/significance] The purpose of this paper is to provide the best engineering practice for the construction of knowledge management in ship research institutes.[Method/process] Firstly, this paper briefly analyzed the present situation and characteristics of the knowledge management in the ship research Institute, and then put forward the methods of solving the problem. By analyzing the process of research and the process of knowledge management, a general model of knowledge management system was designed, including the model of knowledge asset base, the model of knowledge management platform and the model of knowledge operation system. Finally, the validity and adaptability of the knowledge management model were verified by applying it to a ship scientific research institution. [Result/conclusion] By applying this model to a certain type of domain, the efficiency of knowledge production and use is improved effectively, and the research cost is reduced.

导出引用

孙海斌 , 张晓静 , 刘习. 面向船舶科研院所知识工程体系模型构建研究[J]. 知识管理论坛. 2021, 6(2): 118-126 https://doi.org/10.13266/j.issn.2095-5472.2021.012

Sun Haibin , Zhang Xiaojing , Liu Xi. Research on the Model Construction of Knowledge Engineering System for Marine Research Institutes[J]. Knowledge Management Forum. 2021, 6(2): 118-126 https://doi.org/10.13266/j.issn.2095-5472.2021.012

中图分类号： F426.22

参考文献

列表( 原文顺序 | 文献年度倒序 | 文中引用次数倒序 ) 可视化分析

[1]	陈作,赵心,戴钰杰. 船舶系统研制知识工程信息化平台建设[J].科技导报,2020,38(21),75-82. 本文引用 [1]

[2]	田锋. 知识工程2.0[M].北京:机械工业出版社,2016:5-18. 本文引用 [1]

[3]	SAINTER P, OLDHAM K, LARKIN A. Product knowledge management within knowledge-based engineering systems[C]// Proceedings of DETC’00 ASME 2000 design engineering technical conference. New York: Baltimore,2000:1-8. 本文引用 [2]

[4]	SZYKMAN S, RAM D S, CHRISTOPHE B. Design repositories: next-generation engineering design databases[J]. IEEE intelligent systems, 2000, 15(3):48-55. 本文引用 [1]

[5]	孙朝阳，王刚，吕民, 等. 基于 PDM 的工艺知识库管理方法研究[J].计算机集成制造系统,2004(9): 1090-1094. 本文引用 [1]

[6]	安蓉,陈作. 基于系统工程的军工研发企业精益研发体系实践[C]//第二届中国系统科学大会.北京:上海系统科学研究院, 2018:11-12. 本文引用 [1]

[7]	郑田田.加强军工科研院所科技成果管理工作的研究[J].科技经济市场,2020(5):131-133.

[8]	MCKIBBON K A, LOKKER C, KEEPANASSERIL A, et al. WhatisKT wiki: a case study of a platform for knowledge translation terms and definitions.descriptive analysis[J]. Implementation science,2013,8(1):15-17. 本文引用 [1]

[9]	GEBERT H, GEIB M, KOLBE L, et al. Knowledge-enabled customer relationship management: integrating customer relationship management and knowledge management concepts [J]. Journal of knowledge management,2003 ,6(5):23-26. 本文引用 [1]

[10]	李格. 基于军工科研院所项目知识萃取的流程方法研究.项目管理技术[J].2019,10(1):92-96.

[11]	贾倩,王彦静,杨玉堃.基于本体的统一知识模型表达及应用[J].情报理论与实践,2017,40(9):125-128,89. 本文引用 [1]

[12]	LIAO S H. Knowledge management technologies and applications—literature review from 1995 to 2002[J]. Expert systems with applications, 2003,3(2):15-19. 本文引用 [1]

[13]	ZHUGE H. A knowledge flow model for peer-to-peer team knowledge sharing and management[J]. Expert systems with applications , 2002 (1):5-8. 本文引用 [1]

[14]	朱红,贾倩,杨玉堃,等.面向型号的关键知识萃取及表达方法研究[J].航天工业管理,2017(4):45-49. 本文引用 [1]

[15]	ZHUGE H. Knowledge flow management for distributed team software development[J].Knowledge-based systems,2002 ,7(8):13-17. 本文引用 [1]

[16]	GU X J, QI G N, YANG Z X, et al. Research of the optimization methods for mass customization（MC）[J].Journal of materials processing technology，2002 ,2(1):7-10. 本文引用 [1]

[17]	FUJITA K. Product variety optimization under modular architecture[J]. Computer-aided design, 2002 ,8(12):23-28.

[18]	孙桂才,李江,王镜瑞,等.当前科研院所军工管理工作的探索[J].船舶工程,2017,39(S1):282-285. 本文引用 [1]

[19]	SVENSSON C, BARFOD A. Limits and opportunities in mass customization for “build to order” SMEs[J] . Computers in industry, 2002 ,4(1):17-21. 本文引用 [1]

[20]	陆佳颖,方静.基于知识管理的工程船舶设计进度管理优化[J].船舶工程,2018,40(4):95-99. 本文引用 [1]

[21]	LI C L, ZHAO R Y. A rough set based knowledge discovery model and its application in virtual assembly. 2011, 6(5):2132-2139. 本文引用 [1]

[22]	管官,林焰,纪卓尚.基于知识的船体结构快速设计及优化[J].船舶力学,2017,21(4):472-483. 本文引用 [1]

[23]	张艺萌,张艳,平林娜. 航天复合材料知识管理系统应用实践[J].航天工业管理,2019,4(1):79-81. 本文引用 [1]

[24]

KISWANTO D, NURJANAH D, RISMALA R. Fairness aware regularization on a learning-to-rank recommender system for controlling popularity bias in e-commerce domain[C]//2018 International conference on information technology systems and innovation (ICITSI). Piscataway: Intelligent Transport Systems and Infrastructures,2018:56-58.

本文引用 [1]